What does it take to build a deck in Marysville?
Building a deck in Marysville with Trex decking or other composite boards starts with height. The city exempts decks not more than 30 inches above grade and not over a basement or story below, with no size limit, so a wide ground-level deck often needs no building permit. Higher decks need a City of Marysville permit, and lots within 300 feet of a geologic hazard area get a critical areas check. Our typical new decks range from about $20,000 for a 12 × 12 ft composite deck to about $70,000 for a 500 sq ft custom PVC deck. Cactus Decking draws the plan, files the permit, and builds it.
Professional new deck installation in Marysville
New and custom decks planned around your yard, home, entrances, and views, from simple platforms to multi-level builds. Cactus Decking, an Everett deck builder, provides Marysville homeowners with practical design guidance, weather-conscious construction, and a clear project process from the first site visit through the final walkthrough.
Planning new deck installation for Marysville properties
Marysville is in Snohomish County, about 11 miles from our Everett base. Inside Marysville city limits, deck permits are issued by the City of Marysville; addresses with a Marysville mailing address outside the city limits are permitted by the county. We confirm the jurisdiction for your exact address before pricing.
Busy family use
For busy households, we plan room for dining and play, durable boards that resist scratches, and easy access to the yard.
Larger yards
Larger yards allow bigger footprints or freestanding decks, but longer material carries and footing layouts need planning.
Review complete ZIP-code coverage on our Marysville deck services page. The nearest other cities we serve for new deck installation are Everett, Lake Stevens, Mukilteo and Snohomish.
Signs you may need new deck installation
- Splinters, scratches, or worn boards from heavy daily use
- A deck too small for how you use a large yard
- Your back door opens onto a drop, a muddy patch, or an unused corner of the yard
- You want an outdoor dining or seating area that is usable most of the year
How big should your deck be?
About 170 sq ft, for example 12 × 14 ft
That includes about 25% extra for walking room and door swings.
Closest Cactus Decking example: Starter composite deck, about 12 × 12 ft, around $20,000. Your written estimate depends on height, materials, stairs, and access.

What we plan before new deck installation work starts
Footprint and height
We size the deck around doors, windows, furniture, and how people move between the house and yard.
Footings and framing
Footing size, spacing, and beam layout are planned for the deck's height, span, and the soil on your lot.
Permits and setbacks
We check permit needs, property-line setbacks, and height limits for your address before the design is final.
Board and railing choice
We compare composite, PVC, and cedar boards and the railing styles that suit your home.
Composite decking and TimberTech decking options in Marysville
Most Marysville builds come down to these choices. Height matters most here: it decides the permit and whether the deck needs a guard.
Rules from the City of Marysville's exempted-work handout. Lots within 300 ft of a geologic hazard area also fall under the city's critical areas rules.
New Deck Installation work by Cactus Decking
Real Cactus Decking projects from nearby Everett, built by the same crew that works in Marysville.



“We recently had our deck replaced by Cactus Decking, and we’re really happy with the results. The crew was professional, easy to work with, and paid attention to the little details. The whole project was finished on time, and our backyard looks so much better.”
New Deck Installation near you in Marysville
Searching for “deck installers near me”, “Trex decking in Marysville”, “composite decking in Marysville” or “build a deck in Marysville”? Cactus Decking is based at 12029 24th Ave SE in Everett (98208), about 11 miles from Marysville, so we give free on-site estimates anywhere in Marysville.
Look up your neighborhood or ZIP code in our Marysville neighborhood finder.
We also serve nearby Everett, Lake Stevens, Mukilteo, Snohomish, Mill Creek, and Lynnwood.
Guides for new deck installation
Sources and building codes
- Washington State Building Code Council
- Prescriptive Residential Wood Deck Construction Guide, DCA 6 (American Wood Council)
- City of Marysville: Exempted Work handout (2021 IBC/IRC)
- City of Marysville: Critical Areas Management overview (geologic hazard areas)
- U.S. Census Bureau ACS 2020–2024 5-year, table B25034: year built, Marysville (via Census Reporter)
- NOAA NCEI 1991–2020 Annual Normals: Arlington, WA (USC00450257)
What affects new deck installation cost in Marysville?
Your written estimate for new deck installation is based on the actual property. These are the biggest factors:
- Size and height: square footage and how far the deck sits above grade
- Foundation: number and depth of footings, and any extra structure for slopes
- Durability: scratch-resistant boards, gates, and wider stairs
- Distance on site: longer material carries and larger footprints
For material options, installation standards, and warranty details, see our main new deck installation page.
Common new deck installation questions
Do I need a permit to build a deck in Marysville?
Only if the deck is more than 30 inches above grade or sits over a basement or story below. Marysville's exempted-work handout sets no size limit and doesn't separate attached from freestanding decks. Lots near a geologic hazard area also need a critical areas check. We confirm with the city and file the permit when one is needed.
Do you install Trex and composite decking in Marysville?
Yes. Cactus Decking installs Trex and TimberTech composite decking, plus PVC and cedar, and we're a TimberTech certified installer. NOAA's Arlington station, about 10 miles north, records about 176 wet days a year, so capped boards that never need staining make sense here. We bring board samples to your site visit.
Do you work in all of Marysville?
Yes. We serve every Marysville ZIP code; you can look yours up by neighborhood on our Marysville page. Properties near a city boundary may use a neighboring postal city or a different permitting jurisdiction, so include your address and ZIP code with your estimate request.



